![Aussie50](/img/default-banner.jpg)
- 2 106
- 79 214 717
Aussie50
Приєднався 27 лип 2006
I Am Ed, I make videos documenting my weekend hobby engineering/scrap metal recycling work.
My Interests Include Gas And Diesel Engines, Electronics, TV and Audio, High voltage and HVAC Scrap, PC gaming, classic and new, (Half-Life, Doom II, Fallout, etc) and heavy metal music!.
I have a Tenancy to Destroy that which is not useful or repairable, or simply disobeys me. so be sure to watch my motor/appliance destruction videos if you are into stress testing things to the MAX!
My Interests Include Gas And Diesel Engines, Electronics, TV and Audio, High voltage and HVAC Scrap, PC gaming, classic and new, (Half-Life, Doom II, Fallout, etc) and heavy metal music!.
I have a Tenancy to Destroy that which is not useful or repairable, or simply disobeys me. so be sure to watch my motor/appliance destruction videos if you are into stress testing things to the MAX!
Milling a Flat on an old Taiwan milling machine in 304 Stainless.
A little bit of mill work on the old King Rich mill. you can see a test piece I made earlier sitting on the vise on the left.
Material is 304 Stainless, 38.1mm Dia.
Endmill is 12mm solid carbide, was kinda trashed before I even picked it up, but it made it through the job.
I was making a crude 24X24 square drive dog for a pool cover roller, accurate finish is optional but I still came in with .05mm deviance across the flats. not bad for an old Taiwan mill, a chipped carbide endmill and somebody like me who never went to trade school, but was taught by a lot of skilled shop hands and machinists.
Material is 304 Stainless, 38.1mm Dia.
Endmill is 12mm solid carbide, was kinda trashed before I even picked it up, but it made it through the job.
I was making a crude 24X24 square drive dog for a pool cover roller, accurate finish is optional but I still came in with .05mm deviance across the flats. not bad for an old Taiwan mill, a chipped carbide endmill and somebody like me who never went to trade school, but was taught by a lot of skilled shop hands and machinists.
Переглядів: 83 493
Відео
The Parkinson power hacksaw, obsolescent but not obsolete.
Переглядів 17 тис.5 років тому
Its Aussie made, I have spent many a day running one to cut slabs of 6" round bright steel for Flakt-Woods fan hub casting inserts, and Its the revolver of the metal cutting world, it works, its just not a good as a Glock or Sig semi-auto., AKA a bandsaw
In tank Die-Sink EDM test video.
Переглядів 10 тис.5 років тому
Putting the phone in a zip=loc baggie and dangling it in the tank :D bag leaked a little but no harm done, I used a beater phone. I will try an action-cam in a water proof case.
Bubble Bubble boil and EDM!
Переглядів 11 тис.5 років тому
Running some serious amps through the die sink EDM. 100V at 25-30A DC (pulsed) A die sink EDM is essentially a power amplifier with a adjustable frequency generator driving the output. I will endeavor to do a better video in it at a later date once I know more about its internal electronics.
Fun with cars, dogs and machine tools.
Переглядів 14 тис.5 років тому
The big white whale AKA the Mercedes ML270 is having a bad time.
Just a bit of drilling action
Переглядів 6 тис.5 років тому
Drilling her hard with white milky stuff squirting and dripping everywhere ;) 30mm HSS drill into 304SS with a 12mm pilot hole.
Ripping down 304 stainless, manual lathe
Переглядів 7 тис.5 років тому
Just a short cellphone video, I make dozens of these each year, not going to share mission-critical data but just facing to length then turning a spigot on some 76mm (3") 304 stainless steel bar. actual dimensions were 24mm OAL, spigot was 64mm X 10mm. Following processes see it drilled 30mm, bored to 34mm and counter-bored to 48mm prior to die-sink EDM work.
Lathe Tapping - Tappy tap tap
Переглядів 6 тис.5 років тому
Tappy Tap Tap Coolant oil content was low, I do not usually have galling issues like I did that day. M10X1.5 taps in 304 Stainless. Need some sturdy spiral flute taps to try out. straight flute are not really made for this abuse but spirals seem to snap easily, kinda a catch 22
Machine tool update - South Bend Lathe with Digital Read Out.
Переглядів 8 тис.5 років тому
Fitted a Heidenhain DRO to the South-bend and it works well!
Ward Autoward Turret lathe Peg Pin control CNC cabinet overview
Переглядів 8 тис.5 років тому
Just a bit of a overview of the ground breaking CNC Ward turret lathe control box, largely based on vacuum tubes Its actually quite simple,
Merry Christmas My friends,
Переглядів 10 тис.5 років тому
Everything that has a beginning has to come to an end.
WWII era Kemper diesel genset start and run
Переглядів 8 тис.5 років тому
Giving the genset a run after a partial oil change. I cannot afford to replace all the oil in this monster LOL
Diagnosis of the 1961 60kva Kamper Generator (plus full throttle run)
Переглядів 21 тис.5 років тому
Unfortunately its more than a bad set of brushes, its a burnt winding all because somebody got lazy and did not share the single phase load across all 3 phases, instead they overloaded one and it burnt. Fuses should have protected it, but I would bet they were upgraded to the point they were useless. The question is, can I lift the brushes on the bad winding and use 2 phases to neutral (ground)...
Ramblotron Entry for October 18 2018 - Get Back to Work you Slob!
Переглядів 7 тис.5 років тому
Going back to work full time since working for myself is not working out, its good to be back at a full time job, all stainless steel work, machinist and welding work. Once things have stabilized I will terminate the Patreon account and just causally upload videos as I see fit, this channel is just a side project at this point. The generator project will be moving a long tho, and I have yet to ...
Saturday Shenanigans - Diesel Chicken.
Переглядів 10 тис.5 років тому
Saturday Shenanigans - Diesel Chicken.
An introduction to the generator project.
Переглядів 12 тис.5 років тому
An introduction to the generator project.
Old German "Kämper" 60kva 415V Diesel Generator Project? instead of the MB V6 that has water in it.
Переглядів 13 тис.5 років тому
Old German "Kämper" 60kva 415V Diesel Generator Project? instead of the MB V6 that has water in it.
Parkanson power hacksaw chopping some P20 tool steel
Переглядів 6 тис.6 років тому
Parkanson power hacksaw chopping some P20 tool steel
Rambley scrap yard visit and range time.
Переглядів 11 тис.6 років тому
Rambley scrap yard visit and range time.
Old English Milling Machine Vise Cleanup
Переглядів 5 тис.6 років тому
Old English Milling Machine Vise Cleanup
Removing Taper bearing outer races with a tig welder in a lathe, car etc
Переглядів 16 тис.6 років тому
Removing Taper bearing outer races with a tig welder in a lathe, car etc
BMW side intrustion airbag Vs Watermellon pieces
Переглядів 10 тис.6 років тому
BMW side intrustion airbag Vs Watermellon pieces
Curie Vs Japanese talking animal ball (Oshaberi Doubutsu)
Переглядів 8 тис.6 років тому
Curie Vs Japanese talking animal ball (Oshaberi Doubutsu)
Industrial electrical panel salvage for hobbyists
Переглядів 12 тис.6 років тому
Industrial electrical panel salvage for hobbyists
Hard Drive and truck head unit In a Log Splitter
Переглядів 8 тис.6 років тому
Hard Drive and truck head unit In a Log Splitter
Drilling and tapping a bolt circle with a cheap Digital Readout.
Переглядів 6 тис.6 років тому
Drilling and tapping a bolt circle with a cheap Digital Readout.
Locking Ring Split rim - Can you dismount it with an AK47 Bayonet?
Переглядів 8 тис.6 років тому
Locking Ring Split rim - Can you dismount it with an AK47 Bayonet?
3:47 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
hey Ed (@Aussie50) Long shot given how old this video is. I have a broken ASCON MS3D, it does turn on, however it won't output 220V for the pump. I took it apart and it looks like a component (R27) next to the big relay is broken. Would you know by chance the value of that component? It is not visible on mine anymore. Thx!
Those bearings in the washer are probably worn out
Scridner
01:59 is that half life logo
Oh my, I had a friend who just had her machine explode because the concrete weight inside kind of came apart so I needed to find something for her to laugh about ha ha ha ha so I’m re-watching a few of yours and splitting my guts to the same time 😆😆😆😆
Washing mashines are so underrated imo
1:02 sounds like screams from hell
Jackson Steven Moore Brian Harris Mary
Man the 80s rocked as kid was the best decade to be a kid
parrots when you turn on some music in minecraft:
With most destructible washing machines, the motors rev up slower closer to top speed so I think the motors have a power rev up regulator
I feel like I just witnessed a violent assault
It is so satisfying
That kick to the washer in the end was personal
Now we just need Quake to run
Seems like only Aussies own these
hes so nervous
This looks like a prop glitching out in Gmod
1:08 compressor startup
My childhood was like this. I watched these washing machine videos. so good to know i didnt grow up with Skibidi Toliet
Had the exact same Fairmont, even the hard to find black colour! Absolutely loved that car, great on the road and I’m yet to find a more comfy set of seats since.
Where is Coyote Peterson....
When an npc gets stuck into a wall
1:37 track 12
Bro the washer will damage 💀
That is not a partial rrod it is the rrod you should press and hold sunk and press eject to get a error code and look it up and it will be tell you what’s wrong with it
"My washing machine isn't broken1" Bro's washing machine: 3:57
Back in the good old days of when washer destruction was truely cool. RIP aussie50
15 years ?
Campfire
3:38 🤫🧏
Laughing 😂😂😂😂😂
Washing machine: let’s dance! Human: ok but do you know what makes you dance the best? Washing machine: what? Human: bricks 😏 *_Gives brick to washing machine_* Washing machine:
Yry
a esa lavadora tiene que ocurrirle algo porque la mía lleva 15 años centrifugando sin problemas
❤❤❤
2:28 chainsaw
Who's here 2024
why the fuck I searched for that 🥲
Poor motor
200,000km is just run in for the 4.0lt……..R.I.P falcon
CHAIN CHOMP
4:02 Air RAID Siren for WW3 belike
POV: where’s my iphone 13? looks like it’s in the washer
Daikin rxd-jvea air cons suck aye
RIP, Aussie50 😭 you inspired a generation of tinkerers. We miss you mate.
The washing Machi. Ne is exploding
Good Morning, Im working on this same model but it came with wheels the fuel lines were completely gone. trying to rerun new lines but don't know which tube connection on the carb is for the fuel line and which is the return any chance do you recall? thanks
3:39 sounds like a helicopter